I started to think about what would make a good pike lure and i though proberbly the most easy way to start would be to make a jig lure, so i cut 2 pieces of pine wood to 4"x1" pieces.
once i had my 2 pieces i took some card and drew around my block pieces for wood so i could design within the correct size, once i found the right design for me all drawn out on the card i cut out the template.
once i had my template i held it down tight to my pieces of 4x1 and drew around the template reversing the template on the other side of the wood giving me the correct shape on bothe sides of the wood.
once i drew out my design on each side of the wood it was then time to cut out my shape and get it ready for sanding down.
i have acctually run out of sand paper so i'm gonna bob out to the shop get some more, and the next time you read this article there should be more work and pic's.
here's the sanded down product.
all i need to do now is add the weight into the lure and paint and add the trebles.
once i had my 2 pieces i took some card and drew around my block pieces for wood so i could design within the correct size, once i found the right design for me all drawn out on the card i cut out the template.
once i had my template i held it down tight to my pieces of 4x1 and drew around the template reversing the template on the other side of the wood giving me the correct shape on bothe sides of the wood.
once i drew out my design on each side of the wood it was then time to cut out my shape and get it ready for sanding down.
i have acctually run out of sand paper so i'm gonna bob out to the shop get some more, and the next time you read this article there should be more work and pic's.
here's the sanded down product.
all i need to do now is add the weight into the lure and paint and add the trebles.
