Matrix Alloy Open Feeders

geofflukins

Regular member
Joined
Jan 21, 2007
Messages
3,305
I would like to try out a couple of these feeders but notice that Matrix don’t do a mould for these. Do others who use these know if any of the moulds made by Guru, Drennan or Preston could be used with these feeders. I know I could do it by hand but I like to use a mould if I can.
 

ukzero1

Growing old disgracefully.
Site Supporter
Joined
Oct 3, 2004
Messages
15,380
@geofflukins

I have sent a message to a seller on eBay that sells these feeders asking if the moulds are available. But on looking at them, I would have thought a normal mould would do it, although I could be wrong. Will wait for an answer and find out.
 

TheFarr

Member
Joined
Jul 23, 2019
Messages
34
ive watched a few videos on youtube of anglers using these feeders and they all seem to mould them in their hands. I haven't seen one of them use a mould yet.
 

ukzero1

Growing old disgracefully.
Site Supporter
Joined
Oct 3, 2004
Messages
15,380
I have got a reply back from the seller. here's what he says...


eBayLogo.png
7


New message from: iconTopRatedSeller_19x18.png (21,166 stars-11.gif )
Hi and thanks for your message,

The mould is currently out of stock and is on back order with Matrix with no ETA as of yet
Many Thanks.


So there you have it. It might mean looking round for them.
 

geofflukins

Regular member
Joined
Jan 21, 2007
Messages
3,305
Are you sure he is referring to the one for the open feeders as they do a small and large for the method feeders. I’ve looked on the Matrix web site and can see no mention of the mould for the open feeders.
 

ukzero1

Growing old disgracefully.
Site Supporter
Joined
Oct 3, 2004
Messages
15,380
The mould I looked for and asked about was for the method feeders.
 
Top